Filter by brand
GG308 (Glue Gun 220w – P6C24)
₵190.00| Voltage:220-240V~50/60Hz Input power:30W(220W) Gluing capacity:20-30g/min Glue stick diameter:11.2mm With 8 pcs 150mm glue sticks Preheat time:3-5minutes Packed by double blister |
RGH6528 (Rotary Hammer 650w – P1C4)
₵690.00| Voltage:220-240V~50/60Hz Input power:650W No-load speed:0-1700rpm Impact rate:0-5500bpm Impact energy:1.7J Max.drilling capacity: Concrete:22mm Steel:10mm Wood:25mm SDS plus chuck system With 3 SDS-PLUS drills With 1set extra carbon brushes Packed by BMC |
SPDB15008 (Submersible Pump 2hp)
₵2,625.00| Voltage:220-240V~50Hz Rated power:1500W(2.0HP) Max.head:14.5m Max. flow:350L/min Pipe diameter:2″ Copper wire motor Pump body:Stainless Motor body:Cast iron 9m length cable Built-in cutting blade For dirty water Control box for protection Packed by wooden box |
DBM111081 (Masonry drill bit 8X120mm – P75C150)
₵13.00| 8X120mm Packed by plastic bag |
DBM111102 (Masonry drill bit 10X150mm – P80C160)
₵20.00| 10X150mm Packed by plastic bag |
AP140016 (Polisher 1400W – P1C4)
₵950.00| Voltage:220-240V~50/60Hz Input power:1400W No-load speed:1500-3600rpm Polishing pad diameter:180mm Spindle Type : M14 Variable speed control Lock-on switch Aluminum gear box With 1pcs D-handle With 1pcs hook&loop polishing pad With 1pcs polishing bonnet With 1set extra carbon brushes Packed by color box |
AG30008 (Angle grinder 3000w – P1C2)
₵1,715.00| Voltage:220-240V~50/60Hz Input power:3000W No-load speed:6300rpm Disc diameter:230mm Spindle thread:M14 With 1pcs auxiliary handle With 1set extra carbon brushes Disc not included Packed by color box |
HCP12160 (Combination pliers 6″ – P6C60)
₵38.00| Size:6″/160mm Material: #55 Carbon steel Surface treatment: Polish and anti-rust oil One color handle Packed by sliding card |
HDCP12160 (Diagonal cutting pliers 6 – P6C60)
₵38.00| Size:6″/160mm Polish and anti-rust oil One color handle Packed by sliding card |
AG26008 (Angle grinder 2600w – P1C2)
₵1,500.00| Voltage:220-240V~50/60Hz Input power:2600W No-load speed:6200rpm Disc diameter:230mm Spindle thread:M14 With 1pcs auxiliary handle With 1set extra carbon brushes Disc not included Packed by color box |
HFMT8350 (Fibreglass measuring tape 50mx12.5mm)
₵155.00| 3:1 Gear ratio for fast rewind Length & width:50mx12.5mm With metric and inch Pure material retracting gear With all rubber cover Integrated handle good for using and convenient storing Ergonomic handle Packed by color box |
AG24008 (Angle grinder 2400w – P1C2)
₵1,275.00| Voltage:220-240V~50/60Hz Input power:2400W No-load speed:6400rpm Disc diameter:230mm Spindle thread:M14 With 1pcs auxiliary handle With 1set carbon brushes Disc not included Packed by color box |
